Turnkey cell
Complete station
A closed cell with robot, plasma source and safety built in. You program a path once, the station repeats it exactly.
1 to 4
Cartesian robot axes
A5, A4, A3
Treated area
300 mm/s
Maximum speed
20 progr., 200 points
Internal memory, unlimited via PC
- Reply within 48 h from an expert
- Rental available to test on site
- Trials in our laboratory in Québec City
- Quote with no commitment
Technical datasheet, 2 pages, PDF
Dimensioned footprint, required utilities, protocols. To pass on to your integrator.
For repeatable treatment you can prove
A run that must be repeatable
The path is programmed, stored and replayed. The setting becomes data, not know-how.
Treatment done by hand today
Differences between operators disappear, and unexplained scrap with them.
A machine safety requirement
Closed enclosure, interlocked door, built-in extraction: ozone and exposure are handled.
See also
Source, motion and safety in one station
The Cartesian robot moves the source along a linear, circular or rotary path. The station stores it and replays it without drift.
Three levels follow your project: the flexible cell to find the settings, the compact cell for pre-series, the complete cell for production.
Technical specifications
Installation at your site
Indicative values, confirmed during the study of your process.
- Floor footprint
- [x] mm
- Mass of the assembly
- [y] kg
- Extraction required
- [z] m³/h
- Protocols available
- [x]
- Cable lengths
- 3, 5 or 7 m
- Indicative lead time
- [y] weeks
Maintenance, consumables and warranty
- Electrode service life
- [y] h
- Replacement cost
- [z] $
- Preventive maintenance
- [x]
- Warranty
- [y]
- Rental possible
- yes
Frequently asked questions
How do I know whether this equipment suits my part?
Send us the part. We treat it in our Québec City laboratory. Within 48 hours you get the surface energy before and after, the settings used, and a frank opinion if plasma is not the right answer.
Has my material already been treated?
Materials qualified in the laboratory: [x]. Yours is not listed? That is the most common case. Send us three samples: a measured answer within 48 hours.
Can it be rented before buying?
Yes. You test the equipment on site, with your parts and your operators, before investing. Terms: [x].
What documents do you provide for a customer audit?
The process file: plasma settings, measurement methods, results on your parts and procedures. For regulated markets, it follows your sector's requirements.
And if no configuration fits?
We then design a custom reactor, matched to your material and your throughput. See the custom reactors →
To compare, or to complete
Precise area
Compact torch
A nozzle that blows plasma straight onto the area to be treated, a few millimetres from the part. The most common way to activate a precise area.
View the page → Powders and granulatesSpecialised stations
Some materials cannot be treated like a part: a powder requires every grain to pass through the plasma, in line and with no manual intervention.
View the page →
The complement
Test inks
A treatment you do not measure is not a process. The calibrated ink tells you in seconds whether the surface has passed the target threshold.
View the page →
Wide web
Plasma curtain
A continuous curtain across a full width, for panels, sheets or webs on the move. Seven working widths from 60 to 500 mm.
View the page →
Film deposition
Deposition station
When activating is no longer enough: a 1 to 300 nm functional film deposited by atmospheric plasma, anti-corrosion or anti-scratch depending on the precursor.
View the page →
Whole surface
Surface source
A discharge spread across the whole electrode, treating flat parts and flexible films uniformly. No sweeping, so no over-treated band.
View the page →
To specification
DBD reactor
No catalogue configuration fits? Our experts design the reactor to your specification, dimensions and gases included.
View the page →As seen in
